Great British Service
Free UK Delivery Over £50
100% Discreet Packaging & Billing
Looking for a comprehensive air purifier to help against allergies and odours? You've found it in the Naturopure HF380!
This expertly designed air purifier features unique sensor technology to automatically monitor and analyse the air quality around you. The advanced sensors can detect the presence of dust, allergens and odours; an LED light flashes to illustrate the level of air pollution detected, giving you the information needed to eradicate such pollutants and minimise your allergies.
The NaturoPure HF380 offers 7 advanced air purification stages, a HEPA filter with a 99.97% collections rate and a Photo Catalytic Oxidation filter to efficiently reduce chemicals. The Naturopure HF380 Personal Air Purifier has an almost 100% success rate in clinical trials, and is FIVE times more efficient in toxin removal than other models.
The NaturoPure™ Multiple Technologies Intelligent Air Purifier HF 380 outperformed Consumer Reports Top-Rated Air Purifier in recent toxin tests! Nearly 100% effective in clinical tests, and five times more effective in removing toxins from the air when compared against their top rated model. This air purifier also killed 100% of aspergillus mould in clinical tests.
NaturoPure HF 380 takes air purification to a whole new level - now that is a breath of fresh air!
- Odour, dust and allergen sensors let you know when certain pollutants are detected, such as cigarette smoke, chemicals, dust mites, pollen, pet dander, mould spores and many more:
- The clean air monitor tells you how clean or polluted the air is, removing all the guesswork for purifing your air.
- Select "Automatic" mode to maximize performance and energy savings.
- Diagnostic sensors indicate when to replace filters, and when to clean the metal dust collector grid.
- The UV light and negative ion indicators let you know that these functions are working, and indicate when the UV lamp needs to be replaced, so it is not left in too long or replaced prematurely.
Delivery & Returns
|SKU / Product Code||81038|
Find similar products here:
Thank you for your enquiry. If the dust and/or allergen light sensor continues to remain lit this may be a sign that the dust sensor requires a good clean also. A dirty dust sensor may also prevent the unit lowering to low and quiet mode while it is on automatic operation. To clean the sensor please refer back to the user manual. The manual also offers some frequently asked questions and answers.
Why does only one LED light glow under "Clean Air Monitor"?
A. First, the air may have been clean the whole time. Or, the air purifier may be positioned
where the sensor is too far away from the airborne pollutants and irritants. If this is the
case, relocate the unit where it is close to the source of indoor air pollution. To test the
sensor, stir dust or increase pollution near the sensor. If the level of pollution goes up
when this is done, then the sensor is operating properly.
Q. Why is there always two LED lights glowing under "Clean Air Monitor"?
A. There are multiple possibilities for this. One possibility is that polluted air from outside
the room is being circulated into the room with the unit. Another possibility is that a
constant amount of pollution is being created within the room, such as from smoking. It
is also important to note that it can take some time to clean the room to the point where
only one LED light is on, indicating the air around the unit is purified.
Q. Why does the "Clean Air Monitor" function keep switching back and forth?
A. The Irritant Sensor can be affected by a cell phone or other wireless equipment. Keep
cell phones and other wireless equipment away from the unit.
Q. Why does the Dust and Irritant Sensor keep blinking?
A. The top of the sensor has accumulated too much dust, and needs to be cleaned. Please
refer to page 13 of this manual for instructions on cleaning the sensor.
Q. Why doesn't the Odour Sensor work?
A. The sensor memory needs to be reset. Refer to page 5 under Before Using. When first
purchased or when the unit has been unplugged for over a week, the sensor will not be
as sensitive. After 1 to 2 days of operation, the sensor will regain its sensitivity.
Q. Why is the filter not getting rid of dust and odour effectively?
Have the front and back of the filter been mistakenly reversed?
The filter is saturated with dust.please replace the filter.
For more help with a Heaven Fresh product please contact the Manufacturer by emailing firstname.lastname@example.org
Customer Service Team
Apologies I don't know, we don't stock the accessories.
Please go to http://www.heavenfresh.co.uk/ they have all the parts and accessories - we hate to direct you to another site for the fear of a lost sale but it will help you with your purchase to evaluate the costs involved.
Hope this helps
Customer Care Team
There is no 'best' policy, but the auto function does mean that it will keep the air within the area clean and purified to a consistent/constant level, rather than having spikes and the ups and downs that a normal on and off function can sometimes entail.
Hope this helps
Customer Care Team